Люди добрые
не могли бы вы скинуть конфинг для Е90 под винду 95 или 98
всЕ перепробывал какие только конфиги не пробывал
и че я там только не менял
грузится долго причем а потом вылетает бокс в меню
а 3.1 все работает
поповоду настроек ставил пямять 8 мб - цпу динамич.
и ставил 16 мб и камень нормал
все тоже самое мучуюсь уже месяц но не каждый день времени нету
что не так
оцените
# edited by kolijoco for s60 port
[sdl]
# devicescreenx,devicescreeny -- set to your display dimensions
# defaults are qvga (320x240) dimensions
# IMPORTANT:
# be sure to change this to 640x360 if you have a qhd device
# oversize -- what to do with big resolutions
# makes sense with s60scaler=none
# 'shrink'- (default) downscale
# 'page' - virtual screen panning
# pagestepx,pagestepy -- panning steps in oevrsize=page mode' (defaults are 320/240)
# shellres -- stratup shell resolution
# 'high' - normal (default)
# 'low' - mode 0x13
# s60scaler -- select ouput scaler to use (default none)
# IMPORTANT:
# dont use leading, trailing or seperating whitespaces
# stick to the syntax "s60scaler=whatever"
# (reason: this is also parsed by a dumb parser)
# NOTE:
# when s60 scaling is used mouse (touch-ui) input
# coordinates will be scaled from the device resolution
# to to the displayed resolution. keep that in mind when
# writing your virtual keyboard maps
# possible values:
# 'none' - no scaling (or halfsizing)
# 's60full' - use s60 bitmap scaling
# 's60aspect'
# 'swfull' - nearest pixel sw implemetation
# 'swaspect'
# 'glfull' - use opengl-es
# 'glaspect'
# rotatescreen -- rotates screen 180 degs if 'true' ('false' by default)
# premapperfile -- still working but obsoleted add an 's60map' command
# to the autoexec.bat section instead
# NOTE:
# specify mapping file to s60map using its full system path
# (like c:/Data/mymap1.txt), not its mounted dos path.
# shold probably keep those out of your dos tree anyway
#
devicescreenwidth=800
devicescreenheight=352
oversize=page
pagestepx=400
pagestepy=176
sensitivity=250
priority=higher,normal
#premapperfile=e:\data\premapper.txt
shellres=high
s60scale=glfull
rotatescreen=false
scaler=normal2x
[dosbox]
memsize=8
[cpu]
# core -- CPU Core used in emulation: normal,dynamic (dynamic needs more ram!)
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
# Setting this value too high results in sound dropouts and lags.
# You can also let DOSBox guess the correct value by setting it to max.
# The default setting (auto) switches to max if appropriate.
core=dynamic
cycles=1500
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=true
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the evice you want to use. See README for details.
mpu401=none
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=none
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.
gus=false
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
pcspeaker=false
pcrate=22050
tandy=off
tandyrate=22050
disney=false
[joystick]
joysticktype=none
[serial]
serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=none
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
imgmount c e:\data\windows\w98Lite.img -t hdd -fs fat
boot -l c
# Loader 1 -- Windows 3.1
# mount a e:\Data\win31\ (To install more drivers)*
mount c e:\Data\
mount d e:\
c:
c:\Windows\win.com
#Loader 2 -- Norton Commander 5.0
# mount c e:\Data\
# mount d e:\
# c:
# c:\nc\nc.exe
mount c c:\
mount d d:\
mount e e:\
mount f z:\
_________________ Сейчас>Nokia Е90 , Siemens SL45i
__________________________________________________
было>SL-42>>6600>>6670>>p910i>>6670>>MPx220>>3230>>9300
|